• Replace the water tank by inserting it back into the base unit,
until it clicks into position.
STORAGE
• Before storing the device, ensure that it has cooled and dried
thoroughly.
• Check that the water tank is empty.
• Tidy the cord and steam pipe in the base storage; never cram it
tightly as this could cause damage.
• Position the iron onto the rubber support of the base unit; this
will help to prevent the ceramic soleplate from getting
scratched.
• Store in a cool, dry place.
PLUG
1. The plug is fitted with fuse link which is suitable for this type of
appliance and should only be replaced by a fuse link of the same
rating.
2. If access to the fuse link is only possible by removing the plug
cover this must only be done by a suitably qualified person.
3. If the plug or the mains cable of this appliance is damaged do
not use and dispose of the appliance responsibly.
4. This appliance is earthed.
TROUBLESHOOTING
WARNING: To reduce the risk of fire, electric shock or injury, unplug the
device from the mains power supply before troubleshooting.