Beko 01M-8808823200-1722-07 Manual Del Usuario página 13

5 Setting up the device
A
This area shows the dimensions of furniture cutting.
Bu alan mobilya kesim ölçülerini göstermektedir.
MOUNTING TEMPLATE SCALE 1:1
MONTAJ ŞABLONU SKALA 1:1
C
ELECTRO
650 mm
ELEKTRİKLİ
WORKTOP
TEZGAH
Figure 1
5.4 Drilling mounting holes
• Adhere the installation template provided with
the appliance onto the surface on which the in-
stallation will be carried out.
• Drill the holes indicated on the installation draft
with A, B, C, D using a Ø4 mm drill bit. (Figure 1)
Figure 2
• Cut the lower surface of the cabinet where the
hood will be installed in the dimensions speci-
fied in the technical drawing (Figure 2).
Cooker Hood / User Manual
508
570
530
B
386
A,B,C,D = Ø3
D
GAS
650 mm
GAZLI
H670.1170.0 5.01
Figure 3
1. 3.5x9.5 screw
2. Ø 120 mm plastic flue
3. BodyValve pin socket
• Attach the plastic flue contained in the pack-
age to the body of the appliance using 2 screws
3.5x9.5. Do not rub it against the surface. (Fig-
ure 3)
Figure 4
1. Air discharge pipe
2. Air exhaust flue of the hood
• Attach the air discharge pipe to the air exhaust
flue and fasten via clamp (Figure 4).
1
2
3
13 / EN