Operation; Energy Saving Tips - Waeco CoolMatic CD20 Instrucciones De Montaje Y De Uso

Operation

7 Operation
I
NOTE
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the chapter "Cleaning and care" on
page 26).
7.1

Energy saving tips

 Choose a well ventilated installation location which is protected against
direct sunlight.
 Allow warm food to cool down first before placing it in the device to keep
cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooler unit open for longer than necessary.
 Defrost your cooling device as soon as a layer of ice forms.
 Avoid unnecessarily low temperatures.
 Clean the condenser of dirt (dust etc.) at regular intervals.
7.2 Switching on the coolbox
➤ Open the coolbox drawer.
➤ To switch on the coolbox, turn the thermostat knob clockwise
(see fig. 3 1, page 4).
✓ The coolbox starts cooling the interior.
I
NOTE
Ensure that the objects placed in the coolbox are suitable for
cooling/warming to the selected temperature.
24
CD20, CD30
EN