Publicidad
Idiomas disponibles
Idiomas disponibles
3.8. Features
3.8.1. Specification of the volume of the pool
Menu
Cp
3.8.2. Specification of the pH corrector type
Menu
Co
3.8.3. Specification of the concentration of the pH corrector
Menu
Cc
3.8.4. Sensor settings
Menu
Sub-menus
mo
co
ty
mo
fl
Cg
ty
mo
sa
ad
mo
t°
ad
Sensor
activated
Cover
External
command
Flow
Empty pH
container
Salt
Temperature
Water temperature equal to or higher than 15°C
From 0.1 to 0.9 (i.e. from 1 to 9 m
From 1.0 to 9.5 (i.e. from 10 to 95 m
From 10 to 20 (i.e. from 100 to 200 m
AC (pH-)
BA (pH+)
From 05 to 55 (%), in increments of 1.
Setting
Sensor mode
Type of switch
Sensor mode
Type of switch
Salt sensor mode
Calibration of the salt rate measurement
Temperature sensor mode
Calibration of the water
temperature measurement
Configuration
Open cover
Closed cover
Command activated
Command not activated
Sufficient flow
Zero flow
Empty container
Container not empty
Salt level less than 2.5 g/L
(or 1.5 g/L if Low Salt equipment)
Salt level equal to or greater than 2.5 g/L
(or 1.5 g/L if Low Salt equipment)
Water temperature below 15°C
Possible settings
3
), in increments of 0.1.
3
), in increments of 0.5.
3
), in increments of 1.
Possible settings
Possible settings
co (cover position switch)
ex (external control)
OF (sensor disabled)
NO (normally open)
NC (normally closed)
fl (flow sensor)
em (empty pH container sensor)
OF (sensor disabled)
NO (normally open)
NC (normally closed)
ON (activated)
OF (disabled)
From 1.5 to 8.0 (g/L), in increments of 0.5
ON (activated)
OF (disabled)
From - to + 5°C compared to the
measurement, in increments of 1
Possible settings
Specific
Production
display
-
Maintained
co
Divided by 5
-
Maintained
ex
Stopped
-
Maintained
A3
Stopped
A7
Maintained
-
Maintained
A1
Stopped
-
Maintained
Hi
Stopped
-
Maintained
Default setting
5.0
Default setting
AC
Default setting
37
Default
setting
co
NO
OF
NO
OF
5.0
OF
measurement
pH regulation
Maintained
Stopped
Maintained
6
Publicidad
