Publicidad
Idiomas disponibles
Idiomas disponibles
MIDI-Allocation Table for Note Numbers
Description
Deepest MIDI-Note
Deepest note on the piano (88
keys)
Deepest note 76 - keyboard
Deepest note 61 - keyboard
Middle C
Concert pitch A ( 440Hz)
Highest note 61 - keyboard
Highest note 76 – keyboard
Highest note 88 - keyboard
Highest MIDI note
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The interior of the device should be cleaned at least annually using a vacuum-cleaner or an air-jet. The
cooling-fan should be cleaned monthly.
There are no serviceable parts inside the device except for the lamp. Maintenance and service operations
are only to be carried out by authorized dealers.
If the fuse interrupts, please reset the breaker.
Please refer to the instructions under "Installing/Replacing the lamps".
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
If defective, please dispose of the unusable device in accordance with the current legal regulations.
Note
Hex.
C-2
#00
A-1
#15
E0
#1C
C1
#24
C3
#3C
A3
#45
C6
#60
G6
#67
C7
#6C
G8
#7F
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Dec.
Altenative
description
0
C-1
21
A0
28
E1
36
C2
60
C4
69
A4
96
C7
103
G7
108
C8
127
G9
23/44
41907070_V_1_0.DOC
Publicidad
