Publicidad
Idiomas disponibles
Idiomas disponibles
Remove Contents from Carton
1. Open carton completely by cutting each
corner from top to bottom.
2. Remove and verify carton contents prior to
assembly. Carton contents should contain
the following:
Accessories
Item
Main Unit
Owner's Manual
Liter Oil SAE 30
Handle Assembly (A)
Never-flat Wheel (B)
Frame Foot (C)
Product Registration Card
Service Warranty
Emissions Warranty
25' Power Cord (if equipped)
Battery Charger (electric start mod-
els)
Hardware Bag
Rubber Feet (D)
1/2" Axle Pin (E)
Cotter Pin (F)
1/2" Flat Washer (G)
Hex Flanged M6 Nut (H)
Hex Flanged M8 Nut (J)
M8 Bolt (Long) (K)
M6 Bolt (Long) (L)
M8 Nylon Flat Washer (M)
Owner's Manual for Portable Generator
Figure 2-9. Instruction Badge
3. Call Generac Customer Service 1-888-
4. Record model, serial number, and date of
Assembly
Qty.
1
1
1
Call Generac Customer Service at 1-888-
1
GENERAC (1-888-436-3722) for any assem-
2
bly issues or concerns. Please have model
and serial number available.
2
The following tools are required to install the
3
accessory kit.
• Needle Nose Pliers
1
• Ratchet Wrench
1
• 8mm Socket
• 12mm Socket
1
• 13mm Socket
1
• 10mm Wrench
• 13mm Wrench
Qty.
• 8mm Wrench (2) (electric start only)
NOTE: The wheels are not intended for over-
2
the-road use.
2
See
2
Install wheels as follows:
1. Slide axle pin (E) through the wheel (B),
2
2
2. Insert cotter pin (F) through axle pin (E).
6
6
2
4
GENERAC (1-888-436-3722) with the unit
model and serial number for any missing
carton contents.
purchase on front cover of this manual.
WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
Figure
2-10.
wheel bracket on frame, and 1/2" flat
washer (G).
Bend tabs (of cotter pins) outward to lock
into place.
011360
(000100a)
9
Publicidad
