Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
CUSTOMIZING TV SETTINGS
Initial Setup
‡ Connect the power cord to the power socket after you have completed all the
physical connections. At this stage, the TV will enter Standby Mode and the red
LED indicator will illuminate.
‡ In Standby Mode, press the
turn the TV on. The red LED indicator will turn blue.
‡ The first time you turn the TV on, it will go into the Setup Wizard. Press
buttons to select your desired mode and press OK to
Ａｒｅ ｙｏｕ ｓｕｒｅ ｙｏｕ ｗａｎｔ Ｈｏｍｅ Ｍｏｄｅ？
ＯＫ ：
Found
:
0
7
Home Mode:The picture mode will be Standard if you select this mode.
Retail Mode:Select Dynamic Mode if you would like your picture to be brighter. At times this mode may use more energy to
operate the Volume/Sound Mode and Picture Mode.
‡
The ON-MODE Power under Home Mode shoul be less than 55"
‡ The SLEEP-MODE Power should be less than 0.5 W.
En
10
button on the main unit or on the remote control to
Home Mode optimizes the standard video settings.
Use the UP and Down arrows on your remote control or TV keypad
to select power on mode .
5
8
‡
If channels can not bH
found, this frame will EH
GLVSOD\HG DXWRPDWLFDOOy
be less than 55" 165W.
Power On Mode
Home Mode
Retail Mode
Check your antenna or cable connections
andtry again
9
Publicidad
