Publicidad
Idiomas disponibles
Idiomas disponibles
moving the product to a different position.
The product must be disconnected from the
power supply while it is being moved.
Please note: Protect easily damaged
surfaces before setting up the product.
Fully unwind the power cable.
„ „
Loosen the hand knobs
„ „
the product (left and right) by turning them
counter-clockwise in order to position the
stand
as desired (see Fig. B).
5
You can tilt the lamp head
„ „
at any angle of up to 180°.
Simply fix it in position by tightening the
„ „
hand knobs
(see Fig. B).
4
Set up the product in the desired place.
„ „
z First-time operation
Turning the product on/off
TRIPPING HAZARD! Please make
sure that the power cable is
positioned in such a way that
nobody can tread on or trip over it.
Plug the mains connector
„ „
that has been correctly installed to switch
the product on.
Please note: When using the product
outdoors, use an IPX4 socket for the mains
connection to ensure splash protection.
To turn the product off, disconnect the
„ „
mains connector from the power outlet.
Using the hook
RISK OF ELECTRIC SHOCK!
Before moving the product to
another position, disconnect it from
the power outlet.
Use the hook
to hang the product (see
„ „
2
Fig. A). Make sure that you only hang the
product to an object that is capable of
bearing the product's weight.
Please note: Pay attention to the length of
the cable.
on either side of
4
continuously
3
into a socket
7
z Cleaning and storage
RISK OF ELECTRIC SHOCK!
Always unplug the mains power
cable from the socket before
cleaning the product.
For reasons of electrical safety, the product
„
must never be cleaned with abrasive
cleaning agents or immersed in water.
RISK OF BURNS FROM HOT
SURFACES! Allow the light bulb to
cool down completely.
Do not use any solvents, petrol or the like.
„
Doing so would damage the product.
Use only a dry, lint-free cloth for cleaning. If
„ „
the product is very dirty, dampen the cloth
slightly.
z Disposal
Note the labels on the packaging
materials when sorting the waste;
they are marked with abbreviations
(a) and numbers (b) with the
following meanings:
1-7:
Plastics
20-22:
Paper and cardboard
80-98:
Composite materials
You can find out how to dispose of
the used product by contacting your
local district or city council.
The product and packaging
materials are recyclable. Please
dispose of them separately for
better treatment of waste.The Triman
logo is only applicable to France.
In the interest of environmental
protection, when the product has
reached the end of its useful life, do
not dispose of it as general household
waste but have it properly recycled.
For information on recycling centres
and their opening times, please
contact your local council.
GB/IE/NI/CY/MT
41
Publicidad
