z Assembly
Note: Take the product out of the packaging
and remove all packaging material�
Check that all package contents are present�
Please check if the products or individual
parts are damaged� Should you detect any
damage, do not use the product� Contact
the distributor using the service address
provided�
RISK OF INJURY! Improper
handling of the product may
damage the product�
Never assemble the product without a
suitable patio umbrella base�
The minimum weight for the patio umbrella
base must be 50 kg�
Do not place the product on sandy soil,
clay soil or loose earth�
Place a suitable patio umbrella base (not
included in the scope of delivery) in the
desired position�
Make sure that the lower end of the support
pole (bottom)
protrudes at least 40 cm
3
deep into the umbrella base�
Fix the support pole (bottom)
patio umbrella base as described in the
operating instructions of the patio umbrella
base manufacturer�
Make sure it is firmly attached.
Attach the patio umbrella
pole (bottom)
(see Fig. A). Place the
3
support pole (top)
(bottom)
(see Fig. A).
3
Align the bore
with the push-button
5
(see Fig. A).
DANGER OF CRUSHING! Be
careful not to get your hands
crushed�
For easy assembly, press the push-button
while sliding the support pole (top)
4
over the support pole (bottom)
Make sure that the push-button
bore
�
5
8
US-EN
in the
3
to the support
1
over the support pole
2
4
2
(see Fig. A).
3
is in the
4
To disassemble, press the push-button
and lift the support pole (top)
connection is disconnected�
z Opening and closing the
patio umbrella
To open the patio umbrella, push the
push-up handle
6
umbrella is fully open (see Fig� B)�
To close the patio umbrella, pull the
push-up handle
6
umbrella is completely closed�
z Cleaning and storage
Do not use aggressive cleaning agents,
brushes with metal or nylon bristles or sharp
or metallic cleaning objects such as knives,
hard spatulas, etc� These can damage the
surfaces�
The canopy is not washable�
Use only a dry, lint-free cloth for cleaning� If the
product is very dirty, dampen the cloth slightly�
All parts must be completely dry before
storage�
Store the product in a cool, dry place
during winter. Avoid storing the product in
a heated room�
z Disposal
Please inquire about disposal
options of your old product at your
municipality or town administration�
If your product is old and obsolete,
in the interest of environment, do
not dispose of it via your household
waste system, but through specialist
waste disposal systems� Information
on collecting points and opening
hours is available at your competent
administrative bodies�
4
until the
2
upwards until the patio
down until the patio