To Begin Pumping - Ameda FINESSE Instrucciones De Uso

6.3 To Begin Pumping

1.
INSERT TUBING
adapter into pump
base, then turn
slightly to the right
while pushing in
firmly.
3.
TURN SUCTION
dial to right to turn on.
Turn up to your highest
comfortable suction
level. If discomfort, turn
suction down.
6.
Once milk flow
slows, try for another
TURN
let-down.
SPEED
all the way
up, then slow speed
when milk is flowing.
Repeat as needed.
a. b.
SINGLE
For
PUMPING:
Remove one
tube from the
tubing adapter
and close one
side.
4.
TURN SPEED
dial all the way to
the right to highest
speed to start milk
flow.
7.
TURN SUCTION
dial to left to turn
off.
2.
DOUBLE
For
PUMPING: Both
tubes should be
CENTER
attached to the
on breast to create
tubing adapter.
seal.
5.
8.
After pump is
off, if necessary,
INSERT
between breast(s)
and breast flange(s)
to break suction.
flange
Once milk flows,
TURN SPEED
dial to left to slow
pump speed to
help drain milk. Try
half way, adjust as
needed.
a finger
15