Cleaning The Hygienikit - Ameda FINESSE Instrucciones De Uso

7. CLEANING THE HYGIENIKIT

After Every Use: Cleaning The Hygienikit
1. POP OFF
2. SET ASIDE
adapter— you do not need to take these apart from
each other. These 3 parts
washed before first use or after each use— milk does
not come into direct contact with these parts.
Take apart the remaining parts, the diaphragm(s), the
flange(s), valve(s) and milk storage bottles, including
locking ring(s) and locking disc(s), since these are the
parts that can touch the breast milk once you begin
pumping.
ALWAYS
CLEANING: Cleaning with warm, soapy water
After every use, unless otherwise directed by your healthcare provider, prepare the
product for use as follows:
!
IMPORTANT: Set aside tubing, adapter cap and tubing
adapter. These parts DO NOT need to be washed.
1.
RINSE
any milk
from pump parts
with cool water.
the adapter cap from the flange.
adapter cap, tubing and tubing
DO NOT
wash hands well with soap and water.
2.
WASH
Hand
with warm, soapy
water, the flange(s),
diaphragm(s),
valve(s) and (if
applies) bottle(s),
locking ring(s) and
locking disc(s).
Wash valve(s)
and diaphragm(s)
gently. Do not
insert anything
into valve(s) while
cleaning.
need to be
3.
RINSE
with
warm, clean water
the flange(s),
diaphragm(s),
valve(s) and (if
applies) bottle(s),
locking ring(s) and
locking disc(s) .
DO NOT
wash
adapter cap, tubing
and tubing adapter.
Parts shown above.
4.
DRY
Air each
part on a clean
surface.
17