Ameda FINESSE Instrucciones De Uso página 21

AUDIBLE,
HISSING
NOISE OR AIR
LEAKAGE
POWER
SOURCE
If there are still questions or issues please call Ameda's
certified customer service ParentCare team at
(1-866-99-AMEDA).
VALVE CHECK
Inspect the valves for tears or holes. Replace any
damaged valves prior to pumping.
Wash valves per cleaning section. Do not insert
bottle brush or something similar into valves.
We recommend replacing valves approximately
every 8-12 weeks but this can vary depending on
cleaning and use.
CONNECTION CHECK
Check assembly is correct and connection points
are securely attached.
• Tubing adapter to tubing port
• Tubing adapter to tubing
Check adapter cap is attached to breast flange. It
may be useful to remove adapter cap and reattach
to breast flange.
AC POWER ADAPTER
Finesse™ is optimized for use with the AC Power
Adapter. Make sure the AC power adapter is
plugged all the way into the side of your pump base.
Make sure there are no batteries installed in the
pump base. Make sure you rotate the suction dial
up to turn on the pump. Try your pump in a different
electrical outlet.
AA BATTERIES
Be sure the batteries have been inserted correctly
as shown inside the breast pump base's battery
compartment. Use new premium batteries (such
as Energizer, Duracell.) Do not use batteries with
AC power adapter plugged into side of pump base.
If problem persists, you can test that the batteries
work in another battery powered appliance.
1-866-992-6332
21