Soehnle 68026 Manual De Instrucciones página 10

3. Add 1 to 2 drops SOEHNLE
GB
fragrance oil. Reattach upper
part correctly.
4. Connect power supply unit.
5. Place on a level surface.
6. Switch on.
Illumination
After switching the device on it
will be illuminated in alternating
colors. Push again to stop at the
current color. Push again to
switch illumination off.
Push again to switch device off.
B. Cleaning
WARNING: It should be noted
that high humidity can promote
the growth of microorganisms
in the environment. Micro-
organisms that may be in the
water or in the environment
where the unit is used or stored
may grow in the water tank and
be blown into the air. This can
lead to serious health risks if
the water is not
renewed and the
water tank is not
properly cleaned
every 3 days.
Clean the water tank every 3 days
Before cleaning, dis connect the
unit from the mains.
8
1. Remove remaining water.
Do not use ventilation opening!
2. Any build-up, deposits or dirt
film formed on the surfaces of
the water tank or internal sur-
faces must be removed.
3. All surfaces shall be wiped
dry. Wipe out the water reser-
voir with a cloth and cotton
swab.
4. Do not use abrasive or corro-
sive cleaning agents.
C. Specifications
Rated voltage: 24 V ⎓
Dimensions: Ø 180 x 107 mm
Nominal output: 10 W
Water volume: 80ml
Power supply unit:
Modell: K13S240050G
Primary:
AC 100-240 V / 50/60 Hz
0.35 A
DC 24.0 V ⎓ 0.5 A / 12 W
Secondary: