Urmet 1139/2 Manual página 3

ENGLISH
DESCRIPTION
The door phone for Signo 1139/2 is a dedicated product for use in analogue columns in the Ipervoice
system only.
It is provided with a door opening button and three buttons for optional functions described in the system
manual.
INSTALLATION
• Remove the door phone hood.
• Fasten the base to the wall with screws and bolts.
• Connect the CAT5 wire for connecting the system.
• Confi gure the programming switches. Refer to the system manual for details.
• Refi t the hood.
§
Set the dip switches in the same way if the door phone is replaced.
DOOR PHONE CALL TONE
Five tones can be selected on Ipervoice system indoor stations. The
tones can be programmed also by the end user by following the
simple sequence below.
1. Hold the door opener button pressed. Press and release the
button . The indoor station will play a tone.
2. Hold the door opener button pressed and press the button
again to change the tone.
3. Release the door opener button when you have chosen the tone
you want. The tone is now programmed.
FLOOR CALL TONE
Five fl oor call tones can be selected on Ipervoice system indoor
stations. The tones can be programmed also by the end user by
following the simple sequence below.
1. Hold the door opener button pressed. Press and release the
button . The indoor station will play a tone.
2. Hold the door opener button pressed and press the button
again to change the tone.
3. Release the door opener button when you have chosen the tone
you want. The tone is now programmed.
DS1139-002B
3