Samsung AKG VL Serie Manual De Instrucciones página 31

Appendix
Troubleshooting
A
Before requesting service, please check the following.
Symptom
The speaker does not turn
on.
There is no response when
you press a button or
touch wheel area.
There is no sound.
The Dial Controller does
not work.
Check
• Check if the power cord is
properly connected.
• The button or touch wheel
area may be exposed to
statics.
• Is your speaker connected to
a power source?
• The volume may be set to the
lowest level.
• The Dial Controller may not
have enough battery power.
• The Dial Controller may be
out of operating range.
• Check the connection
between the Dial Controller
and speaker.
ENG - 26
Remedy
• Plug in the power cord.
• Remove the plug and connect it
again.
• Check if the speaker is properly
connected to the power.
• Try adjusting volume.
• Press the
RESET button on the
bottom of the Dial Controller.
• Charge the battery as instructed
for the Dial Controller LED
version.
• Bring the Dial Controller closer to
the speaker.
• Check "Connecting between the
Dial Controller and Speaker".
(9 page)
Click here.