Publicidad
Idiomas disponibles
Idiomas disponibles
dRilling in Wood
Holes in wood can be made with the same twist drill bits used for metal or with spade
bits. These bits should be sharp and should be pulled out frequently when drilling to clear
chips from the flutes.
dRilling in Metal
Use a cutting lubricant when drilling metals. The exceptions are cast iron and brass which
should be drilled dry. The cutting lubricants that work best are sulfurized cutting oil or lard oil.
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
iMPoRtant: To assure product SAFeTY and relIABIlITY, repairs, maintenance and
adjustment (other than those listed in this manual) should be performed by authorized
service centers or other qualified service personnel, always using identical replacement parts.
Problem
• Unit will not start.
• Battery pack will not charge. • Charger not plugged in.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BlACk+DeCker help line at
1-800-544-6986.
recommended accessories for use with your tool are available from your local dealer or
authorized service center. If you need assistance regarding accessories, please call:
1-800-544-6986.
WaRning:
The use of any accessory not recommended for use with this tool could
be hazardous.
The rBrC™ (rechargeable Battery recycling Corporation) Seal on the
lithium-ion battery (or battery pack) indicates that the costs to recycle the
battery (or battery pack) at the end of its useful life have already been paid
by BlACk+DeCker. In some areas, it is illegal to place spent lithium-ion
batteries in the trash or municipal solid waste stream and the rBrC program
provides an environmentally conscious alternative.
rBrC in cooperation with BlACk+DeCker and other battery users, has established
programs in the United States and Canada to facilitate the collection of spent lithium-ion
batteries. Help protect our environment and conserve natural resources by returning the
tool to an authorized BlACk+DeCker service center for recycling. You may also contact
your local recycling center for information on where to drop off the spent battery, or call
1-800-8-BATTERY.
MaintenanCe
tRouBleSHooting
Possible Cause
• Battery pack not charged.
• Surrounding air temperature • Move charger and battery pack to a
too hot or too cold.
aCCeSSoRieS
RBRC Seal
tM
8
Possible Solution
• Check battery pack charging
requirements.
• Plug charger into a working outlet.
refer to "Important Charging Notes" for
more details.
surrounding air temperature of above
40 degrees F (4.5°C) or below
105 degrees F (+40.5°C).
Publicidad
