Descargar Imprimir esta página

LG WT1201CV Manual Del Propietário página 25

Publicidad

Idiomas disponibles

Idiomas disponibles

Setting RINSE + SPIN,
Select this option to rinse and spin a load separately from a
regular cycle. This can be helpful in preventing fresh stains
from setting in fabrics. You can change spin speed by
pressing SPIN SPEED repeatedly until the desired speed is
selected.
1
Press the POWER button to turn on the washer.
2
Press the
button until the RINSE+SPIN indicator light
is lit. (The cycle light will turn off.)
3
Press the
button to start the cycle. The washer will
start automatically.
Setting SPIN ONLY,
SPIN ONLY
This button activates the SPIN ONLY cycle to drain and spin.
1
Press the POWER button to turn on the washer.
2
Press the
button repeatedly until the SPIN ONLY
indicator light is lit.
3
Press the
button to start the cycle. The washer will
start automatically.
Setting soak,
SOAK
Helps removes stains by adding a soak time before the end
of the cycle. The cycle time will increase by 3o minutes. The
agitation of the washer will be weaker during a Soak cycle.
NOTE
You cannot select the Soak option during the Tub Clean
y
cycle.
All manuals and user guides at all-guides.com
RINSE + SPIN
USING YOUR WASHING MACHINE
Saving energy,
COLDWASH™
For maximum efficiency, wash only small loads. (less than 8
lbs.)
NOTE
If you press and hold COLDWASH button for 3 second
y
to activate or deactivate SIGNAL, the melody and
button tones can be turn off.
1
Press
, and press
desired cycle is selected.
2
Press
The washer will automatically adjust the cycle
settings.
3
Set any other desired options.
4
Press
.
NOTE
When you select the COLDWASH™ option, wash time
y
will be increased up to about 10 minutes.
For high wash dfficiency, it is recommended to use
y
less than 8 pounds.
Adding extra rinse cycle,
You can add an extra rinse cycle to the default rinse cycle.
1
Press
, and press
desired cycle is selected.
2
Press
.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4
Press
.
Setting fabric softener of laundry,
SOFTENER
The fabric softener is dispensed in the final rinse. Select
FABRIC SOFTENER to change final rinse type from spray
rinse to rinse.
NOTE
When using the EXTRA RINSE option, the fabric
y
softener will always be dispensed in the final rinse.
25
repeatedly until the
EXTRA RINSE
repeatedly until the
FABRIC

Publicidad

loading

Este manual también es adecuado para:

Wt1201cwWt1101cw