SG Group MG3000i Instrucciones De Uso página 48

3.2 ECO mode use.
When the ECO mode switch is deactivated (OFF position) the engine always
works in a constant revolutions rating. This mode is recommended if high
charges (2000W or greater) are being plugged in, as the group will respond
better to this high consumption.
When the ECO mode switch is activated (ON position) the engine revolutions
will be auto adjusted to the charge plugged at any moment. If we connect a low
charge, the engine will work at lower rpm. The revolutions will increase with the
equipment's charge.
Use of the ECO mode allows great fuel savings, especially with low charges.
We will also get a lower noise level and less gas emissions to the atmosphere.
ECO MODE SELECTOR
ECO MODE ACTIVATED (ON) DEACTIVATED MODE (OFF)
When plugging a high consumption electrical device (greater than 2000W),
keep the ECO mode deactivated (OFF Position).
For use with 12V direct current outlet, always keep the ECO mode deactivated
(OFF Position).
You can use the 12V direct current outlet and the 230V current at the Sam time,
but keep the ECO mode deactivated (OFF Position) at all times.
It is normal that upon deactivating the ECO mode (OFF Position) the engine
increases its noise level as the engine's revolutions increase.
45