SG Group MG3000i Instrucciones De Uso página 62

7.1 Use of the 12V DC outlet.
NOTE: The 12V direct current outlet is only valid for 12V battery charging.
Do not connect 12V electrical or electronic devices to the generator.
Before battery charging check the safety-use instruction of the battery.
NOTE: For use with 12V direct current outlet, always keep the ECO mode
deactivated (OFF Position).
NOTE: You can use the 12V direct current outlet and the 230V current at
the same time, but keep the ECO mode deactivated (OFF Position) at all times.
1 First connect the clamps in the battery terminals.
2 Then connect the charging cable to the generator panel.
3 Start the generator.
CHARGING CABLE
CAUTION: Connect the red cable (+) to the red terminal (+) of the battery
and the black cable (-) to the negative (-) of the battery.
CAUTION: In order to avoid sparks in the battery terminals, first connect
the charging cable to the battery terminals and then plug to the generator.
59