26
USING YOUR WASHING MACHINE
Adjusts the melody and button tones,
SIGNAL
The washing machine plays a melody when the wash cycle
is finished. The buttons make a sound each time a button is
pressed. The melody and button tones can be changed and
off as desired.
A
1
Press
.
B
2
Turn
to the desired cycle.
3
Press
. Adjust the melody and button tones as
desired.
4
Press the desired option to use the other options.
C
5
Press
.
Prewashing,
PRE-WASH
Pre-wash for 16 minutes when clothes are covered in dirt or
dust. This feature is suitable for heavily soiled items.
B
A
1
Press
and turn
2
Press
.
-
light will turn on.
3 Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
C
4
Press
.
Rinse, drain and spin only,
Use this cycle to rinse detergent from load.
B
A
1
Press
and turn
2
Press
.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
C
4
Pulse
.
to the desired cycle.
RINSE+SPIN
to the desired cycle.
Adding extra rinse cycle,
You can add an extra rinse cycle to the default rinse cycle.
B
A
1
Press
and turn
2
Press
.
-
light will turn on.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4
C
Press
.
Presetting the start time,
You can set the desired start time.
B
A
1
Press
and turn
2
Press the desired option to use the other options.
3
Press
repeatedly to select the desired start time.
-
light will turn on.
- The set start time appears on the display panel.
- Each press of the button increases the delay time by
one hour, up to 19 hours.
C
4
Press
.
Efficiency cleaning,
Adding the Steam option to these cycles provides superior
cleaning performance while reducing energy and water
consumption.
By using a hot steam spray from above and cooler water
below, fabrics get the cleaning benefits of a super hot wash,
without the energy usage or potential damage to fabrics.
B
1
A
Press
and turn
2
Press
. The washer will automatically adjust the
cycle settings.
3
Set any other desired options.
4
C
Press
.
WARNING
Do not touch the door during steam cycles.
y
surface can become very hot. Allow the door lock to
release before opening the door.
Do not attempt to override the door lock mechanism
y
or reach into the washer during a steam cycle. Steam
can cause severe burns.
EXTRA RINSE
to the desired cycle.
DELAY WASH
to the desired cycle.
STEAM
to the desired cycle.
The door