Sun Microsystems GDM-5410 Manual página 8

x x x x Using the , m/M, and </, buttons
1
Display the main MENU.
Press the button to display the main MENU on your
screen.
2
Select the menu you want to adjust.
Press the m/M buttons to highlight the desired menu. Press the
button to select the menu item.
3
Adjust the menu.
Press the m/M buttons to select the desired adjustment item.
Press the </, buttons to make the adjustment.
b
4
Close the menu.
Press the button once to return to the main MENU, and
twice to return to normal viewing. If no buttons are pressed,
the menu closes automatically after about 30 seconds.
x x x x Resetting the adjustments
Press the (reset) button. See page 14 for more information
on resetting the adjustments.
b
Adjusting the brightness and
contrast
Brightness and contrast adjustments are made using a separate
BRIGHTNESS/CONTRAST menu.
These settings are stored in memory for the signals from the
currently selected input connector.
1
Press either one of the
(contrast) </, buttons.
The BRIGHTNESS/CONTRAST menu appears on the
screen.
BR I GHTNESS / CONTRAS T
2 6
(brightness) m/M buttons to adjust the
2
Press the
), and 6 6 6 6 (contrast) </, buttons to
brightness (
adjust the contrast (6 6 6 6 ).
If you are using the sRGB mode
If you selected the sRGB mode in the COLOR menu, the
following BRIGHTNESS/CONTRAST menu appears on the
screen.
BR I GHTNESS / CONTRAS T
5 6
s RGB :
For more information about using the sRGB mode, see
"Adjusting the color of the picture (COLOR)" on page 12.
The menu automatically disappears after about 3 seconds.
(brightness) m/M or 6 6 6 6
2 6
7 6
5 6 7 6
9
EN