Publicidad
Idiomas disponibles
Idiomas disponibles
BAR AND CHAIN COMBINATIONS
Chain Specifications: 3/8 in. pitch, .043 in. chain gauge, 6-tooth drive sprocket.
Length of Bar
12 in.
TROUBLESHOOTING
PROBLEM
Bar and chain running hot and smoking.
Motor runs, but chain is not rotating.
Saw will not run with the battery installed.
This product has a 90-day satisfaction guarantee policy, as well as a three-year
limited warranty. For warranty and policy details, please go to www.RIDGID.com
Guide Bar Part Number
319901001
CAUSE
1. Check chain tension for over tight
condition.
2. Chain oil tank empty.
1. Chain tension too tight.
2. Check guide bar and chain as-
sembly.
3. Check guide bar and chain for
damage.
1. The battery is not charged.
2. The chain brake is engaged.
or call (toll free) 1-866-539-1710.
20 — English
Chain Part Number
678928001
SOLUTION
1. Tension chain. Refer to Chain Ten-
sion earlier in this manual.
2. Check oil tank.
1. Retension chain, Refer to Chain
Tension earlier in this manual.
2. Refer to Assembling the Bar and
Chain earlier in this manual.
3. Inspect guide bar and chain for
damage.
1. Use a fully charged battery.
2. Release chain brake. Refer to
Operating the Chain Brake in the
Operation section of this manual.
Drive Links
45
Publicidad
