KLASS Fan SLIM L1S Manual De Instrucciones página 7

Remove one of the three screws from
the rotor holder, and unscrew the
other two.
Apply the fixing plate to the unscrewed
screws and turn it to block it. Fixing
plate
Bring the third screw.
Tighten the three screws.
Light Kit
Plate
Screws
Take out the wires from the inside of
the rotor.
Plate
Connect the fan wires with the wires
of the light kit.
Install the lamp shade into the light
plate.
Wires
Lamp shade
5