Fulgor Milano FDW8292.1 Instrucciones De Instalacion Y Uso página 54

ADJUSTING THE RINSE AID DISPENSER MODE
Press and hold the PROGRAM SELECTION (3) button, after
approximately 15 seconds the salt light flashes, keep it pressed until the
rinse aid light (5) flashes and the program indicator lights (2)
indicate the current setting.
Then press the PROGRAM SELECTION (3) button several times to
select the required dosage according to the following table:
After carrying out the adjustment or displaying the current setting, if you
do not touch the button for a few seconds the dishwasher will
automatically exit from adjustment mode and return to the standard
operating mode.
dispensed
Minimum. 2 ml
Maximum. 6 ml
Default settings: b4 - 5 ml


16
User instructions
RINSE AID ADJUSTMENT TABLE
0 – not
b0
b1
3 ml b2
4 ml b3
5 ml b4
b5
The amount of rinse aid must be increased if the washed dishes
appear dull or feature circular stains.
If, on the other hand, the dishes are sticky or have white streaks, it is
necessary to reduce the rinse aid setting.
>
All indicator lights off
One indicator light on
Two indicator lights on
Three indicator lights on
Four indicator lights on
Five indicator lights on