Publicidad
Hardware Usage Guide
HOW TO USE A TWIST-LOCK
1.
Push a TWIST-LOCK® FASTENER
into the large hole in the part.
Step 1
å
Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
å
Push six SAUDER TWIST-LOCK® FASTENERS (7F) into the large holes in the LEFT END (B) and FIXED SHELF (G).
7F
www.sauder.com/commercial-office/service
FASTENER
®
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
Do not tighten the TWIST-LOCK® FASTENERS in this step.
B
G
2.
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
Meet Parts (B and G). These components
have been engineered to be lighter,
stronger, faster... well ok. Not technically
faster. But definitely makes for a sturdier
5-shelf bookcase that' s easier to assemble
and friendlier to the environment.
7F
427450
Dowel end
2
Page 5
Publicidad
