Publicidad
Idiomas disponibles
Idiomas disponibles
Safety
Proper use, operating area
The SmartCheck 10, 100, 400, 800 and 1500 torque testers are
suitable for testing indicating and tripping torque wrenches and for
general torque measurement.
The SmartCheck 10S torque tester is only suitable for testing
indicating and tripping torque screwdrivers.
Use in potentially explosive atmospheres is prohibited.
Proper use also includes observing and compliance with all of the
data in these instructions. This particularly applies to observing and
compliance with all safety instructions and warning notices as well as
the technical limit values. The DPG must only be used by personnel
trained in using the DPG.
Any other, or more extensive, use is regarded as improper, and can
lead to material damage or personal injury
Basic safety instructions
Avoiding a risk of explosion
Risk of explosion due to use of the DPG in explosive areas.
➢ Do not use the DPG in explosive areas.
Avoiding electric shock
There is a danger of death due to electric shock if you ignore the
following safety instructions:
➢ Never open the DPG housing.
➢ Use only the USB cable included in the scope of delivery in
conjunction with a commercially available USB power plug; see
page 61.
➢ Disconnect the USB cable from the DPG before cleaning the DPG.
54
Publicidad
