Stahlwille SmartCheck USB/DAPTIQ Instrucciones De Uso página 78

Operation
Setting the torque unit
The following units can be set for the torque:
• N‧m
• ft‧lb
• in‧lb
To set the desired torque unit, proceed as follows:
➢ Press the "CLEAR HOLD POWER" button and keep it pressed.
➢ Press the "+" button until the marking at the top of the display
points to the corresponding unit.
➢ Release the buttons.
The last setting carried out is stored and is available when the
DPG is next switched on.
76