If extra cleaning is needed, follow the guidelines below:
You may use compressed air under 2,5 bar (35
-
psi). Air only, no chemicals.
You may soak the catalysts in a hot water mix (not
-
boiling), 4 parts water, 1 part vinegar. Rinse with
cold water until vinegar smell is mostly gone.
No metal tools should be used.
-
No detergents or chemicals.
-
Removal of catalysts is not recommended unless more
detailed inspection is warranted because of decreased
performance.
6 – PRODUCT RECYCLING
Your appliance is delivered packed in plastic and a
cardboard box on a wooden pallet. You can use
cardboard and wood as fuel for the first lightings of the
appliance, or take it to a local recycling point. The
plastic that protects the device must be taken to a
specific local recycling point or center, it must not be
disposed of in conventional waste dumpster.
All local regulations, including those that refer to
national or European regulations, must be applied
when recycling this device at the end of its useful life.
The product should never be disposed of in
conventional waste dumpster. Its appliance is made up
of components made of cast iron, steel, glass,
insulating materials and electrical material, which are
assembled using screws and rivets. You can
disassemble it and take it to a specific local recycling
point or center. Glass should not be disposed of in
conventional waste dumpster.
18