LUCCI AIRFUSION CLIMATE Manual De Instrucciones página 8

Airfusion Climate Installation Instructions
INSTALLING THE CANOPY COVER

Loosen 2 screws from the bottom of the mounting bracket.

Slide the canopy up to the mounting bracket and place the key hole on the canopy over the screw on the
mounting bracket, turn the canopy until it locks in place at the narrow section of the key holes and secure it by
tightening the two set screws. Avoid damaging the electrical wiring prepared previously.

Attach the canopy cover to the canopy and secure it by pushing the lugs into the holes.
BLADE INSTALLATION

Attach the blade to blade bracket kit and secure the blade to blade holder by tightening 3 screws. Fig. 8

Attach the blade holder assembly to motor and secure it by tightening the 2 motor screws. Fig. 9

Repeat to install the other blades.

Finally install the bottom cover to shaft of motor by rotating it clockwise.
Fig. 8
7 | P a g e
Fig. 7
Fig. 9