Publicidad
Protec�on
OCP
(Over Current Protec�on)
OVP
(Over Voltage Protec�on)
UVP
(Under Voltage Protec�on)
OPP
(Over Power Protec�on)
OTP
(Over Temperature Protec�on)
SCP
(Short Circuit Protec�on)
FAQ
1.
Can't find out the 4 pin CPU cable.
We provide two 4+4 pin CPU cables, it can be used in split mode.
2.
How to connect 8 pin PCIe with 6+2 pin PCIe cable?
Combine the 6 pin and 2 pin before connec�ng it to the GPU.
3.
How to connect the motherboard cable?
Plug in the 18 pin and 10 pin connectors to the PSU, and insert the 24 pin connector to
the motherboard.
4.
Can't power up the PSU successfully.
Check if the motherboard and CPU cables are connected to the motherboard exactly,
or the PSU will not work.
5.
A�er installing a new GPU, the PC system crashes frequently.
It means the PSU is inadequate for your GPU, before purchasing the PSU, please refer
to our PSU calculator tool on ENERMAX website.
6.
The fan won't spin a�er the PSU power on for a several seconds.
PSU fan will spin clockwise at the beginning to clean itself and then turn counterclockwise
for several seconds, and stop to ac�vate semi-fanless func�on.
OCP makes sure that the output of the DC voltage rails remains within safe
opera�ng limits.
OVP shuts down the PSU when the DC outputs exceed a certain level, which is
determined by the PSU manufacturer.
UVP shuts off the PSU when the voltage under the certain stander.
OPP shuts off the PSU when the power drawn is between 115% ~ 135% of the
rated power.
OTP makes sure that the PSU will shut down when the internal temperature
reaches a set point.
SCP makes sure that the PSU shuts down when the 3.3V, 5V, and 12V rails short
to any other rail, or to ground. It also ensures that no damage should occur to
the unit, or your PC's components in the event of a short.
17
Publicidad
