Install to Fit Your Application
Flex duct is recommended in connecting to the DR65A3000 collars to reduce vibration noise.
A
Dedicated Return to Dedicated Supply
SEPARATE
RETURN
B
Main Return to Main Return
RETURN
DEHUMIDIFIER
DR65A3000 Dehumidification System 33-00297EFS—15
Duct Sizing: Use minimum 8" diameter round for duct
lengths up to 25' Minimum 10" required for lengths
longer than 25' Duct branches from the main inlet/
exhaust should be minimum 8" round for 2-3 branch-
es, and 8" round or larger for 4 branches or more.
Isolated Areas: Effective dehumidification may
require ducting to isolated or stagnant air flow areas.
DEHUMIDIFIER
SUPPLY
M36846
AIR HANDLER
SUPPLY
M36845
Electrical requirements:
120 VAC outlet. Ground fault
interrupter (GFI) recommended.
Note: If voltage is below 102
VAC or above 132, dehumidifier
may be locked out.
Ideal when...
•
DR65A3000 will not be ducted to a
forced air HVAC system.
Ideal when...
•
Running DR65A3000 with A/C
operation.
•
System fan must run with dehumidifier.
•
Minimizing discharge air temperature
(DAT) increase is preferred.
•
Access to a dedicated central return for
DR65A3000 is not available.
M24745
5