Publicidad
Idiomas disponibles
Idiomas disponibles
•
Wear appropriate clothes. Do not wear loose clothes or jewelry. Hold the hair, clothes and gloves
out of reach of moving parts. Ample clothes, jewelry or long hair can be taken in mobile parts.
•
Avoid any impromptu start -up. Make sure the switch is on the stop position before connecting the
electrical outlet, entering the tool or transporting it. A risk of accident exists if your finger is on the
switch to the electric tool when you wear it or when you connect it to the on-position.
•
Do not rush. Be sure to keep a safe position and keep your balance at any time. This will allow you
to better control the electric tool in unexpected situations.
ELECTRIC SAFETY RULES
•
The electrical tool sheets must be adapted to the base. Never modify the sheet in any way. Do not
use adapters with earth connection tools. Unclear sheets and suitable bases will reduce the risk of
electric shock.
•
Do not mistreat the cord. Never use the cord to wear, pull or disconnect the tool. Maintain the cord
away from heat, lubricant, edges or moving parts. When using an outside tool, use an extension
adapted to external use. If the use of a tool in a damp location is inevitable, using a power supply by
a residual differential current device (RCD).
•
The power cable cannot be replaced. If the cable is damaged, the device should be put to the scrap.
SAFETY INSTRUCTIONS FOR MOWER
•
Hold all parts of the body at a safety distance from the blade. When the blade turns, do not try to
remove the cut equipment or maintain the equipment to be cut. Remove the pieces stuck only when
the engine is stopped and the battery withdrawn.
•
Wear long pants, a pair of glasses, boots and gloves. It is essential not to be barefoot, in sandals
or with canvas shoes. Wear protective shoes that will protect your feet and improve your balance
on slippery surfaces.
•
In order to avoid contact with the cutting blade or projected objects, prevent anyone from approa-
ching within a radius of 15m when the tool works.
•
Do not put anything in the ventilation slots. Keep openings free from dust, hair or anything that could
reduce air flow.
•
Carefully inspect the area where the tool should be used. Remove any object that can damage the
cutting blade or be projected (pebbles, stones, branches, ropes, toys etc.). Projected objects can
cause serious injuries.
•
Do not direct the tool to people or animals.
•
Never use the cut-off cuts without protective hood.
•
Repairs to the electrical device must be entrusted exclusively to qualified and approved personnel,
using only original spare parts. Thus, the safety of the device will be preserved.
•
Wear the borders cut by the handle with the arrested blade (at rest). When transporting or storage
of the cutter cutting, remove the battery. Careful manipulation of the device reduces the risk of injury
by the blade.
•
Always keep the hands and feet out of the cutting device enough, especially when you start the
engine.
•
During work with the device, make sure you always have sufficient lighting or sufficient light condi-
tions.
•
Do not use the device to cut the grass that is not on the ground, such as the grass that grows on
walls, rocks, etc.
•
The power cable cannot be replaced. If the cable is damaged, it is necessary to put the device to
the scrap;
•
Never cross roads or paths engraved with the device on the march.
03/04/2023
EN
35
Publicidad
