EN
MOW
We strongly recommend that you follow the steps in this section, in order to obtain optimum results and to
better reduce the risk of incident.
•
Unroll the extension near the sector outlet, and position the mower so that the entire cable is visible
and quite spaced in the cutting area.
•
Start the mower as explained previously.
•
Handle your tool as a schematics on the sketch below, to avoid passing on the power cable.
WARNING : Be careful not to drive / mow on the electric cable, you would expose yourself at a risk
of electrocution as well as a short circuit that would damage your device and your domestic electri-
cal equipment.
42
03/04/2023