2. Clean the upper part of iron with a soft damp cloth. Wipe the water drop on the unit base
and the thermal insulation stand with dry cloth.
3. Perform auto-clean by following the operation described in "AUTO-CLEAN
FUNCTION" when the "Descaling indicator" illuminates.
4. When do not use the appliance for a long time, pour out the water in the tank, turn the
temperature dial to the minimum setting and store the iron on the thermal insulating
cushion and then push the iron lock to the lock position to lock the iron well.
Note: The whole steam station can be lifted up by grasping the iron' s handle after the
iron being properly locked on the unit base.
5. When not in use, the steam supply hose and power cord can be folded well and stored in
their respective storage boxes,then put the appliance at a place out of the reach of children.
IRONING TIPS
-Always check first whether a label with ironing instructions is attached to the article. Follow
these ironing instructions in any case.
-The iron heats up quicker than cooling it down, therefore, you should start ironing the
articles requiring the lowest temperature such as those made of synthetic fiber.
-If the fabric consists of various kinds of fibers, you must always select the lowest ironing
temperature to iron the composition of those fibers.
- Synthetic fibre and silk fabrics should be ironed on their inner side to avoid being shone.
-Velvet and other textures that rapidly become shiny should be ironed in one direction with
light pressure applied. Always keeps the iron moving at any moment.
-Pure wool fabrics (100% wool) may be ironed with the steam iron. Preferably set
temperature dial to the third position and use a dry cloth as a mat.
- Never iron over zip, rivet in the cloth. This will damage the soleplate. Iron around any such
object.
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations:
hand in the non-working electrical equipments to
an appropriate waste disposal center