Extended Menu; Saving Parametres - Televes Avant3 Manual De Instrucciones

Launch Amplifi er Avant3
FILTER 2
Error F1
_
27
The LEDs on the unit are lit depending on the fi lter
that we are programmed.

Extended menu

To access the this menu keep pressed the
for more tan 3 sec.
The extended menu can only be accessed from
the fi rst main menu (Confi guration of inputs).
The modifi cation of the value selected in each
menu, and the recording of changes, is performed
in the same manner as in the main menu.
Language selection
The extended menu allows to select the language
on the display.
The mapping of the keys in this menu are as
follows:
& To select the language
(Short press) - Positioning of the cursor.
(Long press) - Return to main menu.
(Short press) - Not applicable.
(Long press) - Recording of parameters.
_
31
key,

Saving parametres

After choosing the desired value in any of the
menus (main or extended), for recording data,
press the key for approximately 3 seconds. The
display shows the indication:
Saving
config...
If you try to record data but you are committing an
error in the fi lter settings (channel overlapping),
the unit does not allow this operation and displays
the following message:
Filter
error!
24