Dreame R20 Manual Del Usuario página 14

How to Use
EN
Working Methods
Select from two working methods for the vacuum, which can be selected based on your
own needs.
Method 1: Discontinuous Cleaning Mode
Press and hold the switch of the vacuum to enable this mode, and release it to stop
immediately.
Method 2: Continuous Cleaning Mode (Trigger Switch Lock)
Press the trigger switch lock to switch to Continuous Cleaning Mode, and then briefly
press the on/off switch to keep the vacuum in Continuous Cleaning Mode.
Use the trigger switch lock to free your fingers from fatigue caused by holding the switch.
Note:
• In this mode, briefly press the on/off switch to suspend the operation or start again and the
working mode of the vacuum will not change.
• Press the trigger switch lock again to quit Continuous Cleaning Mode.
Switching Suction Level
Press the button to switch levels between auto and turbo.
When in Turbo Mode, all fan-shaped icons will light up in white.
Only in Auto Mode, the suction level and the color of fan-shaped icon change with the
amount of inhaled dust.
9