Descargar Imprimir esta página

Hilti SID 4R-22 Manual De Instrucciones Original página 12

Ocultar thumbs Ver también para SID 4R-22:

Publicidad

Idiomas disponibles

Idiomas disponibles

▶ Never use the battery or a battery-operated power tool as a striking tool.
▶ Never expose batteries to the direct rays of the sun, elevated tempera-
ture, sparking, or open flame. This can lead to explosions.
▶ Do not touch the battery poles with your fingers, tools, jewelry, or other
electrically conductive objects. This can damage the battery and also
cause material damage and personal injury.
▶ Keep batteries away from rain, moisture and liquids. Penetrating moisture
can cause short circuits, electric shock, burns, fire and explosions.
▶ Use only chargers and power tools approved for the specific battery
type. Read and follow the relevant operating instructions.
▶ Do not use or store the battery in explosive environments.
▶ If the battery is too hot to touch, it may be defective. Put the battery
in a place where it is clearly visible and where there is no risk of fire,
at an adequate distance from flammable materials. Allow the battery
to cool down. If it is still too hot to touch after an hour, the battery is
faulty. Consult Hilti Service or read the document entitled "Instructions
on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage
and use of lithium-ion batteries. → page 15
Read the instructions on safety and use of Hilti Li-ion batteries
that you can access by scanning the QR code at the end of these
operating instructions.
3
Description
3.1 Product overview
Tool holder
@
Screw
;
Forward/reverse switch with
=
switch-on interlock
Battery
%
Installation slot for acces-
&
sories
Tool holder (
1
(
3.2 Intended use
The product described is a hand-held cordless impact wrench with hex
socket. It is designed for driving and removing screws and for tightening and
releasing nuts and bolts in wood, metal, masonry and concrete. It is shaped
specifically so that it can be used in places that are difficult to reach.
For this product, use only Hilti Nuron lithium-ion batteries of the B 22
series. For optimum performance, Hilti recommends the batteries stated
in the table at the end of these operating instructions for this product.
8
English
1
/
" hex socket)
4
Work-area light (LED)
)
Air vents
+
Control switch with electronic
§
speed control
Mode indicator
/
Mode selector
:
Battery release button
Battery status indicator
$
2373959
*2373959*

Publicidad

loading