•
Use normal glass cleaner and a soft cloth to wipe off the outside casing. Never use alcohol,
solvents, or ammonia-based cleaners.
•
Always be sure to dry all parts completely before plugging the device back in.
•
Do not immerse the device in any liquid.
Maintenance
Regular inspections are recommended to insure proper function and extended life.
•
All screws should be tightened and free of corrosion.
•
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling,
suspension, trussing) should not be deformed, modified or tampered with; e.g. do not drill
extra holes in mounting supports, do not change the location of the connections...
•
Mechanically moving parts must not show any signs of wear and tear.
•
The electric power supply cables must not show any damage. Have a qualified technician
maintain the device.
•
There are no user-serviceable parts, apart from the fuse.
•
Refer to an authorized dealer for service and/or spare parts.
Fuse Replacement
1. Unplug the device's power cord from the outlet.
2. Let the device cool down.
3. Open the fuse holder.
4. Replace with an identical fuse.
5. Insert the fuse holder back in its place, replace the rear cover and reconnect power.
7.
Technical Specifications
power supply
HQLE10049 ................................................................................ 100-240 V~, 50/60 Hz
remote control .................................................................................... 1x CR2025 (incl.)
power consumption ................................................................................................... 25 W
fuse .................................................................................................................. F1A/250V
flash rate ............................................................................................................. 0-20 Hz
LEDs in device ............................................................................................... 4x 3 W RGBA
dimensions .......................................................................................... 375 x 170 x 85 mm
weight ................................................................................................................... 1.7 kg
(environmental temperature) .............................................................................. ≤ 25 °C
t
a
t
(steady-state housing temperature) ........................................................................ 43 °C
x
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulting from (incorrect) use of this
device. For more info concerning this product and the latest version of this manual,
please visit our website www.velleman.eu. The information in this manual is subject
to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual may be copied, reproduced, translated or reduced to any electronic
medium or otherwise without the prior written consent of the copyright holder.
V. 01 – 07/12/2020
HQLE10049
8
©Velleman nv