Descargar Imprimir esta página

HoMedics BPA-040 Manual Del Usuario página 6

Ocultar thumbs Ver también para BPA-040:

Publicidad

Idiomas disponibles

Idiomas disponibles

DISPLAY EXPLANATIONS
Date/Time
Indicator
BPA-040_A.indd 11-12
BPA-040_A.indd 11-12
Systolic
Pressure
Diastolic
Pressure
Pulse Rate
9
Display Symbols:
Weak Battery Symbol: Appears when batteries should be
replaced.
Pulse Symbol: Shows the pulse rate per minute.
Memory Average: Displays average of last 3 readings
Risk Category Index: See page 20 for more information.
If
and any of the following letters and numbers appear in the
area that systolic pressure should be displayed, an error has occurred
with your reading. See Troubleshooting section of this manual for more
information.
Measurement Error: Measure again. Wrap the cuff
correctly and keep arm steady during measurement.
Air Circuit Abnormality: Check cuff connection. Measure again.
Pressure Exceeding 300 mmHg: Turn the unit off to clear,
then measure again.
Error Determining Measurement Data: Measure again.
10
12/1/09 9:42 AM
12/1/09 9:42 AM

Publicidad

loading