Descargar Imprimir esta página

HoMedics BPA-040 Manual Del Usuario página 7

Ocultar thumbs Ver también para BPA-040:

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLING BATTERIES
1. Press down on latch and lift the battery cover to
open the battery compartment.
2. Install or replace 4 "AA " sized batteries in the
battery compartment according to the indications
inside the compartment.
3. Close the battery cover by pushing in the top end
of the battery door.
A A
A A
A A
A A
BPA-040_A.indd 13-14
BPA-040_A.indd 13-14
Battery
Cover
11
Replace the batteries if:
1. The weak battery symbol appears on the display.
2. Nothing appears on the display when the power is
switched on.
Replace all batteries at one time (as simultaneous set).
Use only 1.5V AA alkaline batteries. Remove batteries
when unit is not in use for extended periods of time.
Date and time will need to be reset if batteries are
removed or replaced. Clean contacts on battery and
in battery compartment with a soft dry cloth each
time you install batteries.
Note: Batteries are hazardous waste. Do not dispose
of them together with the household garbage.
12
12/1/09 9:42 AM
12/1/09 9:42 AM

Publicidad

loading