Publicidad
the workpiece or when the power tool becomes over-
loaded.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic. The GSB
is also designed for impact drilling in brick, concrete and
stone.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
Technical Data
Cordless drill/driver
Article number
Rated voltage
No-load speed
– First gear
– Second gear
Impact rate
Max. torque, hard/soft screwdriving applica-
A)
tion according to ISO 5393
Max. drilling diameter (first and second gear)
– Wood
– Steel
– Masonry
Tool holder
Max. screw diameter
Weight according to EPTA-Procedure
A)
01:2014
Recommended ambient temperature during
charging
Permitted ambient temperature during opera-
B)
tion
and during storage
Recommended batteries
Bosch Power Tools
(1)
Tool holder
(2)
Keyless chuck
(3)
Torque presetting ring
(4)
Mode selector switch
(GSB)
(5)
Gear selector switch
(6)
Cover cap
(7)
Battery
(8)
Battery release button
(9)
Worklight
(10) Rotational direction switch
(11) On/off switch
(12) Handle (insulated gripping surface)
(13) Universal bit holder
(14) Carbon brushes
(15) Battery charge indicator button
(16) Battery charge indicator
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GSR 180-LI
3 601 JF8 1..
V=
-1
min
0–500
-1
min
0–1900
-1
min
Nm
54/21
mm
mm
mm
1.5–13
mm
kg
1.6–2.6
°C
0 to +35
°C
–20 to +50
GBA 18V...
ProCORE18V...
English | 9
A)
GSB 180-LI
3 601 JF8 3..
18
18
0–500
0–1900
–
0–27000
54/21
35
35
10
10
–
10
1.5–13
10
10
1.7–2.7
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
1 609 92A 4JG | (13.09.2019)
Publicidad
