Descargar Imprimir esta página

Toto TES100AA Manual De Instalación Y Del Propietario página 8

Dispensador automático de jabón
Ocultar thumbs Ver también para TES100AA:

Publicidad

Idiomas disponibles

Idiomas disponibles

8. Connect sensor cables.
1. Remove pump unit from the tank.
2. Slowly pour liquid soap into the tank.
NOTE:
Keep pump unit clean while filling
soap, especially keep bottom of
pump off from floor.
NOTE: Fill the tank up to MAX fill line.
NOTE: Use only TOTO approved liquid soap.
3. Replace the pump by pushing it down firmly
over the tank opening until it snaps in place.
INSTALLATION PROCEDURE - Tank
Tube
Pump Unit
Bottom of pump
7
Sensor cable
from spout
Sensor cable
from controller
Liquid soap
MAX fill line
Tank

Publicidad

loading

Este manual también es adecuado para:

Tes100daTes100dacp