Publicidad
Step 11
Fasten two ANGLE BRACKETS (5G) to the VALANCE (L).
å
Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: Be sure the edges of the ANGLE BRACKETS are
å
even with the edge of the VALANCE.
Fasten four ANGLE BRACKETS (5G) to the BOTTOM (F).
å
Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: Be sure the edges of the ANGLE BRACKETS are
å
even with the edge of the BOTTOM.
Fasten the BOTTOM MOLDING (S) to the BOTTOM (F).
å
Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
Fasten the VALANCE (L) to the TOP (E2). Use two BLACK
å
9/16" LARGE HEAD SCREWS (1S).
Curved edge
5G
Page 16
S
F
BLACK 9/16" LARGE HEAD SCREW
Curved edge
L
E2
409048
L
1S
(12 used in this step)
www.sauder.com/services
5G
Publicidad
