Publicidad
Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
EN
Voltage
Maximum Air Volume
Maximum Air Velocity
Maximum Blower Force
Recommended Operating
Temperature
Recommended Storage
Temperature
Approximate Run Time
(With EGO 5.0 Ah battery)
Blower Weight
(Without battery pack, with tube)
Measured sound power level L
Sound pressure level at
operator's ear L
PA
Guaranteed sound power
level L
WA
(according to 2000/14/EC)
Vibration a
h
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should
wear gloves and ear protectors in the actual conditions
of use.
PACKING LIST
PART NAME
Blower
Blower tube
Operator's manual
10
56 VOLT LITHIUM-ION CORDLESS BACKPACK BLOWER — LB6000E
56 V
1020 m
/h
3
232 km/h
19 N
-15°C-40°C
-20°C-70°C
15 min (Boost)
22 min (High speed)
120 min (Low speed)
5.7 kg
94.6 dB(A)
K=0.8 dB(A)
WA
82 dB(A)
K=2.5 dB(A)
95 dB(A)
0.522 m/s
2
K=1.5 m/s
2
QUANTITY
1
3
1
DESCRIPTION
KNOW YOUR BLOWER (Fig. A & B)
1. Handle
2. Battery-Release Button
3. Latch
4. Electric Contacts
5. Ejection Mechanism
6. Air Inlet
7. Front Tube (Curved Flat Tube)
8. Air Outlet
9. Front Tube (Cylindrical Tube)
10. Middle Tube
11. Control Handle
12. Adjustable Support Harness
13. Blower-Tube Storage Knob
14. Boost Button
15. Speed/Lock-on Dial
16. Air-speed Trigger
17. Wing Nut
18. Tube-Hanging Groove
WARNING:
The safe use of this product requires an
understanding of the information on the tool and in this
instruction manual as well as knowledge of the project
you are attempting. Before use of this product, familiarize
yourself with all operating features and safety rules.
ASSEMBLY
WARNING:
If any parts are damaged or missing,
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not attempt to modify this product
or create accessories not recommended for use with this
blower. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possible
serious personal injury.
WARNING:
To prevent accidental starting that could
cause serious personal injury, always remove the battery
pack from the tool when assembling parts.
ASSEMBLING THE BLOWER TUBES
1. There are three tubes for the blower: two front tube (a
cylindrical tube & a curved flat tube) and a middle tube
(Fig. C).
Publicidad
