Sharp UA-HG50E Manual De Uso página 14

HOW TO CHANGE VARIOUS SETTINGS
You can change the functions in the "Type of setting" table in the following.
1 Turn the unit power OFF.
2
3 Select "Function number" from the
table in the following.
Forward
or
Set
Type of setting
Function
Light Control
You can select the brightness of the
Front Display, Cleanliness Monitor
and Air Outlet LED.
more
3 sec.
Reverse
...
UA-HG40E
E-11
4
Select "Setting number" from the table
in the following.
Forward
or
Set
5
Press Power button to fi nish the set-
ting.
Setting
Auto
(default)
Light automatically switches ON or OFF based
on room brightness.
Room is bright: light is ON
Room is dark: light is OFF
Darker
Turn off
● When set to "Turn off", the "Darker" light illumi-
nates for 3 seconds after operation starts and
then the light turns off.
● The Humidity Light fl ashes darker only when
the unit needs water.
● Patrolling Light fl ashes/lights dimmer only
when the room temperature or humidity re-
quires attention.
Reverse
UA-HG40E
Turn off