Pinolino 11 00 19 Instrucciones De Montaje página 4

IMPORTANT - PLEASE READ CAREFULLY! -
KEEP FOR FUTURE REFERENCE
Dear clients,
We are glad that you have chosen this premium product. We, the Pinolino staff, have manufactured this item with greatest care. The materials that were used are eco-friendly and comply
with the strict European safety standards.
To spare you unnecessary effort, carefully read the assembly instructions first. Check whether you have all the parts and study the illustrations carefully before you start the assembly.
Improper handling or assembly and especially construction alterations will void all warranty claims.
THIS COT COMPLIES WITH THE EUROPEAN NORMS:
EN 716-1, EN 71-3.
Removable bars:
One of the bedsides has three removable bars, which can be detached. The removable bars have plastic caps at their ends which are secured in the beam by means of a spring. The
rounded beam, wider and fitted with springs for the mobile bars is installed on the topside. To pull off the mobile bars, they have to be pushed upwards until the other end comes out from
the inferior beam. Mounting is done in reverse order.
Safety requirements:
Please check regularly that the screws are well tightened. The screws should not be loose, as children could squeeze certain parts of their body or catch items of clothing (e.g. laces,
necklaces, bands, dolls etc.). These might present the hazard of strangulation.
The mattress support has three height positions. Please make sure that the mattress support is set in the right position, so that the child will not fall. The lowest position is the safest
position. As soon as the child can sit up, the mattress base should only be used in this position.
Please use only the enclosed hex key and a screwdriver for the assembly. To avoid damaging the product, do not use an electric screwdriver for tightening the screws!
Please note:
Use only original accessories and spare parts from the producer or from the providers. Plastic bags and other plastic elements / wrappings should be removed immediately and kept out
of the reach of children!
Assembly instructions:
Please set the parts on an even, flat surface. Make sure that the article isn't inclined.
We recommend using the packaging of the article as underlay in order to protect it and its bottom side.
Warning:
Do not use the cot if single parts are missing, broken or torn. Use only original spare parts recommended by Pinolino.
To prevent the child from falling out, the cot should no longer be used if the child is able to climb out of the cot.
Warning:
Objects that can serve as footholds, or ones that present the hazard of suffocation or strangling, e.g. laces, drapery or curtain chords etc., must not be left inside the cot.
The mattress must be chosen so that the depth of the cot (mattress upper surface to top edge of the bed frame) will be at least 50 cm in the lowest position of the mattress support and at
least 20 cm in its highest position. The mattress size should be 140 cm x 70 cm, or at least 139 cm x 68 cm. The maximum thickness of the mattress for this bed must be 10 cm.
Warning:
Never use more than one mattress in the cot.
Warning:
The size of mattress must ensure that the gap between the mattress and the side ends is no more than 30 mm, however the mattress is positioned.
4