Publicidad
Idiomas disponibles
Idiomas disponibles
Setting up your thermostat
Setting up your programmable thermostat is easy. It is preprogrammed and ready to go
as soon as it is installed and registered.
1
Install your thermostat.
Connect your home WiFi network.
2
3
Register online for remote access.
Before you begin, you may want to watch a brief installation video. Go
to honeywellhome.com/support
Installing your thermostat
You might need the following tools to install this thermostat:
• No. 2 Phillips screwdriver
• Small pocket screwdriver
• Pencil
• Level (optional)
1 Switch OFF power to your
heating/cooling system.
Important! To protect your
equipment, switch OFF the power to
your heating/cooling system at the
breaker box or the system switch.
• Drill and bits (3/16" for drywall,
7/32" for plaster) (optional)
• Hammer (optional)
• Electrical tape (optional)
Circuit breaker
3
or
Heating/cooling
box
system power
switch
M31535B
69-2715EF—07
Publicidad
