Publicidad
Idiomas disponibles
Idiomas disponibles
Descaling the water tank
• Fill the water tank halfway with water.
• Add a small quantity of descaler.
• Tightly close the water tank using the screwed plug.
• Shake the water tank by rocking it back and forth several times.
• Empty the descaling solution completely.
• Rinse the base unit twice with clean, fresh water.
Storage
If you do not plan to use the device for a relatively long period of time, we recommend that you thoroughly
empty, clean and dry the device and store it in the original packing in a dry environment, ensuring it is not
weighed down by additional items.
9. Accessories and replacement parts
TIP!
If the water is hard, we recommend using the optional anti-limescale filter in addition to the anti-lime pads
supplied.
NOTE
• If the anti-limescale filter does not prevent limescale build-up, or if white
deposits form on or in the device, the anti-limescale filter should be replaced.
• The service life of the anti-limescale filter is around two to three months at
most.
• If the device is not used for a relatively long time, the anti-limescale filter must
be removed from the water tank and dried out.
Fitting the anti-limescale filter
• Lift the water tank and rotate it.
• Open the screwed plug on the water tank.
• Screw the anti-limescale filter onto the screwed plug on the inside.
• Tightly seal the water tank using the screwed plug.
Replacement items
For replacement parts and additional items visit www.beurer.com or contact the corresponding service
address in your country (according to the service address list).
Replacement parts and additional items are also available from retailers.
Item
10 anti-lime pads
10 aroma pads
Beurer by Taoasis "Vitality" aroma oil (10 ml)
Beurer by Taoasis "Harmony" aroma oil (10 ml)
Beurer by Taoasis "Relax" aroma oil (10 ml)
Beurer by Taoasis "Sleep Well" aroma oil (10 ml)
Anti-limescale filter
Item number
163.141
163.142
681.30
681.31
681.32
681.33
162.843
22
Publicidad
