Only For Kw-Nt50Hdt; Using Information Service; Using The Traffic Information Service - JVC KW-NT50HDT Manual De Instrucciones

Using information service

This function is available on KW-NT50HDT only, not equipped with on KW-NT30HD.

Using the traffic information service

As the traffic information is transmitted by radio
stations, JVC cannot assume responsibility for the
completeness or accuracy of the information.
Traffic information on the map
Traffic icon (☞ page 36)
Congestion
• Traffic icons are displayed on the map when its scale
is between 80 ft (25 m) and 1.5 mi (2.5 km) with
<Traffic Icon> setting activated (☞ page 41).
How traffic information is reflected in
navigation
The traffic information is reflected in navigation
differently according to <Bypass Traffic> setting.
1

(Only for KW-NT50HDT)

(Total Traffic HD NET WORK Service)
2
Auto The System automatically calculates
a new route when you approach a
traffic event.
Manual Operating buttons appear on
the screen when you approach a
traffic event. Recalculate the route
manually. (☞ below)
Off The System does not take traffic
information into account.
• It may not avoid a congestion even if <Auto> is
selected.
When <Manual> is selected...
Recalculates the route
Shows the detail of the alert
Appears when you approach a traffic
event on your route
• The traffic alert indication disappears while you are
checking due to a change of traffic conditions. The
traffic alert indication also disappears if you do not
confirm the rerouting in one minute.
35
Ignores the traffic alert