Bluetooth Device Settings - JVC KW-NT50HDT Manual De Instrucciones

Bluetooth device settings

For Bluetooth mobile phone
1
2
Menu items
Connection
PIN Code
Device Name
Device Address
Auto Connect
Auto Answer*
* Appears only for <Phone Settings>.
Selectable settings
Connect: ☞ page 80
Disconnect: ☞ page 80
Displays the PIN code of the unit.
• To change the PIN code, press [Change], enter a new PIN code, then press [OK].
Shows the device name to be shown on the Bluetooth device — "KW-NT50HDT" or
"KW-NT30HD."
Shows the MAC address of the unit.
On: The connection is automatically established with the last connected Bluetooth
device when the unit is turned on.
Off: Cancels.
On: The unit answers the incoming calls automatically.
Off: The unit does not answer the calls automatically. Answer the calls manually.
For Bluetooth audio player
1
2
86
Initial: Underlined